I have a 1994 Crownline 19 foot boat. I purchased the ST1290 Smart Tabs, and I am having a problem installing them due to the way My boat sits on my trailer and the way the Swim Platform is on the back of the boat.
Can I mount the top mount to the angled part under the Swim platform?
Here are a bunch of Pictures on the back of my boat.
http://www.karaoke-computers.com/bryan/newboat/back1.jpg
http://www.karaoke-computers.com/bryan/newboat/back2.jpg
http://www.karaoke-computers.com/bryan/newboat/back3.jpg
http://www.karaoke-computers.com/bryan/newboat/back4.jpg
http://www.karaoke-computers.com/bryan/newboat/back5.jpg
http://www.karaoke-computers.com/bryan/newboat/back7.jpg
Pictures 3 and 7 show pretty good, the angle where the top mount would be best mounted. I can't get it close enough for it to mount to the left or right of the Exhaust pipes, due to the Trailer bunks sticking out so far. The trailer is a little big for this boat, I think. In the very front of the trailer, the tongue can be moved forward, but right now it is as far back as it will go, so there is no way to move the boat any further back. The bunks are mounted on a frame, so this is not feasible to cut down.
I could put it so the bunks actually pushed the trim tabs UP, if that is possible, without damaging the trim tabs. Let me know if this is an Option.
Thanks,
Bryan
Can I mount the top mount to the angled part under the Swim platform?
Here are a bunch of Pictures on the back of my boat.
http://www.karaoke-computers.com/bryan/newboat/back1.jpg
http://www.karaoke-computers.com/bryan/newboat/back2.jpg
http://www.karaoke-computers.com/bryan/newboat/back3.jpg
http://www.karaoke-computers.com/bryan/newboat/back4.jpg
http://www.karaoke-computers.com/bryan/newboat/back5.jpg
http://www.karaoke-computers.com/bryan/newboat/back7.jpg
Pictures 3 and 7 show pretty good, the angle where the top mount would be best mounted. I can't get it close enough for it to mount to the left or right of the Exhaust pipes, due to the Trailer bunks sticking out so far. The trailer is a little big for this boat, I think. In the very front of the trailer, the tongue can be moved forward, but right now it is as far back as it will go, so there is no way to move the boat any further back. The bunks are mounted on a frame, so this is not feasible to cut down.
I could put it so the bunks actually pushed the trim tabs UP, if that is possible, without damaging the trim tabs. Let me know if this is an Option.
Thanks,
Bryan