New Maxum owner needs help with cuddy arrangement(2000 1900 SC)

[Brandonman]

Hello,
I just bought this boat used. Its a 2000 Maxum 1900 SC 5.0L merc engine. I'm having trouble with arranging all of the cushions in the cuddy so that you can sleep in it. Can someone please help by taking a picture of your cuddy of this model and send it to me or post it on the reply. The previous owner never used it so he didn't know either. I have unsucessfully search for this online. Thank you in advance

brandonmanv21@yahoo.com

 

[hostage]

Re: New Maxum owner needs help with cuddy arrangement(2000 1900 SC)

I got some for yah I'll post them up in a bit luckily we have the same model and year

 

[Brandonman]

Re: New Maxum owner needs help with cuddy arrangement(2000 1900 SC)

Thanks hostage!!! Do you need the porta potty in place to be there in order to lay out the cushion? I know that there are two pieces of wood that slide out to raise the seating from both side but is there another piece of wood that run across so that you can lay out the two cushions where your would have rest you legs when in a seating position. Please see pic of what I was able to find online

BTW, I grew up in Buffalo/Niagara Falls NY 2 hrs away from Rochester
Thanks again

 

[hostage]

Re: New Maxum owner needs help with cuddy arrangement(2000 1900 SC)

I think the cushions lay on top of the boards and you need to adjust them to allow the cushions to sit properly. I don't think the head can support or should support the cushions. I really haven't messed with them much.

-Hostage

Edit: Taking a second closer look at your photo I noticed the cushions should all be flush/on the same level. I think you need to slide that board forward.

 

[Brandonman]

Re: New Maxum owner needs help with cuddy arrangement(2000 1900 SC)

Hostage,
Can I get a view from the opening as well. I can't tell if the 2 cushions in front should go from right to left of front to back. Thanks for your help

 

[Brandonman]

Re: New Maxum owner needs help with cuddy arrangement(2000 1900 SC)

Is there a board that also run from the two seat cushion? I only see two boards that slides out to level the seat area higher. Don't know if I missing any other boards for the 2 cushions where you would rest your feet in a sitting position AND if these two cushion should be layed vertically of horizantally...Thanks

 

[hostage]

Re: New Maxum owner needs help with cuddy arrangement(2000 1900 SC)

I only have some photos that I took a while back. Some of them might have picture of the missing puzzle. I will attach a few more, but it might be best if you take a picture of what you want to know and draw a circle around it.

I don't have my boat with me it is about 15 miles away near the Marina.

 

[Brandonman]

Re: New Maxum owner needs help with cuddy arrangement(2000 1900 SC)

OK, I struggle to get the cushion together today. Seems like I'm missing a board or something. Upon sliding the board out to level the seat, there is NO support struture left for the other two cushion. From your pic, it seem like those two cushions is in a horizontal position. Please see the first pic where I drew where a board seem to be missing.

 

[hostage]

Re: New Maxum owner needs help with cuddy arrangement(2000 1900 SC)

The two cushions long side runs port to starboard. The spot where you put the possible board, no board exists. In the photo where you see the head I just took out two cushions. One thing that does look different between our two pics:

1) My cushions have the board sticking out to allow the cushions to reset on the board.

2). You boards looks like they have the cushions over hanging them, so you don't have any place for your center cushions to lay.

 

[Brandonman]

Re: New Maxum owner needs help with cuddy arrangement(2000 1900 SC)

Hostage,
Your observation is exactly correct. I will have to play with it some more know that I know I'm not missing any piece. There must be something that I'm doing wrong with the seat cushion to not have enough overlay for the other cushions to rest on. Thanks for your time. At least I know how the other two should be position.