Bullie
Petty Officer 1st Class
- Joined
- Dec 20, 2014
- Messages
- 300
I usually stick to my old Evinrudes and Johnsons but a fellow asked me to see if I could get his 9.8 Nissan 4 Stroke working again. I have a very similar, if not the same, motor that my dad uses, a 9.9 Mercury 4 stoke. This fellow had let someone borrow his motor and that person left it laying on the wrong side for a couple days. I have dealt with the same issue with my motor. Anyway, I cleaned the carb up and reinstalled. Before installing the new gas line from the fuel pump to the carb, I gave the bulb a few squeezes to move any old gas out of the line. No gas would move through the fuel pump but it was being pushed into the filter. I pulled the line entering the fuel pump off and gave the bulb a squeeze and fuel shot out as expected.
Is the fuel filter on this motor reasonably easy to rebuild? Is that what it sounds like I need to do? A new one is $57 plus shipping but if I can fix it I would rather do that. I am not familiar with this design but sort of surprised I couldn't push fuel through it.
What do you recommend?
Is the fuel filter on this motor reasonably easy to rebuild? Is that what it sounds like I need to do? A new one is $57 plus shipping but if I can fix it I would rather do that. I am not familiar with this design but sort of surprised I couldn't push fuel through it.
What do you recommend?