hello all,
this is my firts post but i have been reading this forum for a while, the steering on my bayliner trophy fitted with omc cobra drive (1988) is very stiff. The cable is free. i decided to do the bellows and the gimbal bearing before relaunching my boat. I took the drive off no problem but i cant get the top steering arm to seperate from the gimbal housing. Has anybody got a picture of the omc puller for the job or any advice to get it off with out the puller.. I live in ireland and getting a puller could be an issue but i sure i could make one if I saw it..
thanks in advance Gary
this is my firts post but i have been reading this forum for a while, the steering on my bayliner trophy fitted with omc cobra drive (1988) is very stiff. The cable is free. i decided to do the bellows and the gimbal bearing before relaunching my boat. I took the drive off no problem but i cant get the top steering arm to seperate from the gimbal housing. Has anybody got a picture of the omc puller for the job or any advice to get it off with out the puller.. I live in ireland and getting a puller could be an issue but i sure i could make one if I saw it..
thanks in advance Gary