The plywood for the floor in my "59" Crestliner is ready to lay in. Finally we have had a couple of good days. I settled on 3/4" Marine plywood, painted an almond then sealed with two part epoxy. Started sanding the old paint off of the gunwhales and the bow. Once all of the topside and inside, seats, steering wheel, fish finder, bimini top, etc gets done the top side will be finished. Then I will start on the hull, if I don't get fishin fever first. Thanks to a lot of help and suggestions here, this should make a nice boat when done.<br /><br />Thanks to all who have advised!!!!!
