Power pack problem?

dnyhuf

Seaman
Joined
Jul 28, 2007
Messages
60
1992 Johnson 200GT - installed new pak and did not know that I pinched blue wire and black/white wire on stud which is ground. Hit ignition and motor started for a second and died. No spark.:confused: Pulled pak and found pinched wires.:eek::redface: These wires go to starboard side and disappear in timing base. Anyone know what damage was done?

Update.....repaired wires, hit key,all is good.:D
 

jonesg

Admiral
Joined
Feb 22, 2008
Messages
7,198
Re: Power pack problem?

Gee thats a tough one, try fixing the pinched wire :)
 

dnyhuf

Seaman
Joined
Jul 28, 2007
Messages
60
Re: Power pack problem?

Gee thats a tough one, try fixing the pinched wire :)

Seems simple enough, now explain why a pinched not broken wire was pulled away from ground, and still no spark. 20 minutes later after asking question on forum, I return, and it fires right up.
 
Top