Power Trim Removal (frozen) - 130Hp Johnson

[Striper500]

I am trying to replace my power trim and tilt unit. Can anyone suggest the best means to remove the stainless pins (3/4 - 1 inch thick) ? they seem to be frozen ? I have already removed the horseshoe clips ....I have used and impact gun and a hammer thus far and have been unsuccessful.

I am nervous about heat, as I do not want to damage the aluminum housing that they go through.

 

[HighTrim]

Re: Power Trim Removal (frozen) - 130Hp Johnson

What year motor is this? Are you referring to the pivot pin? They can sometimes be difficult. You will need a good penetrating oil, and a heavy hammer and punch. Oil it, hit, oil hit, etc... I had one take me 3 days The good news is once you get it moving, it goes easier. Some heat the housing with a torch, thus expanding it, causing the pin to slide easier.

 

[Striper500]

Re: Power Trim Removal (frozen) - 130Hp Johnson

Sorry - it's a 130HP 1995 w/ Fast Track