Prob a stupid question/ Filling out dirve

fishingman220

Chief Petty Officer
Joined
Jun 13, 2008
Messages
568
I have read the manual a few times, and no i dont have a detailed manual. but i understand that to drain you pull the bottom plug and the top to vent. but from what i am reading you put the fluid back in from the bottom untill it comes out of the top, but how do you pump it in the bottom? is there something you thread into the bottom and hook a oil pump to it??? Like i said a stupid question, im sure it has been answered before.
 

fishingman220

Chief Petty Officer
Joined
Jun 13, 2008
Messages
568
Re: Prob a stupid question/ Filling out dirve

sorry, for got, alpha one gen 2, and i do have a resivor up by the engine, also where can i find a top to the resivor? mine right now is plastic wrap held on by a hair tie
 

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
71,096
Re: Prob a stupid question/ Filling out dirve

but how do you pump it in the bottom? is there something you thread into the bottom and hook a oil pump to it???

Ayuh,... You buy a Pump Kit,...

It's a plastic pump that screws into your oil bottle, with a hose on it, to a fitting that's screwed into the lowerunit...

On your's,... Pump til the oil comes out the vent, reinstall the vent screw, then pump til the resv. is nearly full...

You'll run out of the 1st qt. of oil, Just before it gets to the vent,...
I change oil bottles just before that happens, so I don't get air bubbles pumped in with the oil...
 

fishingman220

Chief Petty Officer
Joined
Jun 13, 2008
Messages
568
Re: Prob a stupid question/ Filling out dirve

ok cool, a buddy of mine made the mistake last year of draining it, and pouring it in the top till it ran out. fried the drive preatty fast, didnt want to do that to mine
 

havasuboatman

Ensign
Joined
Mar 5, 2009
Messages
904
Re: Prob a stupid question/ Filling out dirve

Dude,
the only stupid question is the one not asked. You wont be ridiculed on this site for wanting to learn.
 
Top