problem with carb 105hp

[beach]

69 105 hp chrysler. <br />Idle adjustment <br /><br />Upper carb: turning adjustment screw clockwise has no affect on motor, keeps running the same.<br /><br />Lower carb: turning adjustment screw clockwise causes motor to stall. <br /><br />Adjustments on lower carb seem to have normal affect on motor but upper carb adjustments seem to have no affect on motor.<br /><br />Any thoughts?

 

[The Marine Doctor]

Re: problem with carb 105hp

There is not spark on that cyl or no fuel reaching it.<br /><br />TMD

 

[beach]

Re: problem with carb 105hp

All plugs show same fouling.

 

[The Marine Doctor]

Re: problem with carb 105hp

Place your hand over the carb and see if it floods out.<br /><br />TMD

 

[beach]

Re: problem with carb 105hp

Placing my hand over lower carb causes engine to stall in about 2 sec, over upper carb engine stalls in about 6 sec. both spill out gas from carb when I remove my hand, the upper carb more than the lower.

 

[R.Johnson]

Re: problem with carb 105hp

Check the snyc on your throttle plates, both should be fully closed at idle. There is a link arm connecting carb plates. Make adjustment here if need be. The carb that won't respond could be slightly open at idle. That will cause the problem you have.

 

[beach]

Re: problem with carb 105hp

They are in sync.