Prop for a 1967 40HP pin drive

[lonewolf0140]

I recently bought a 1967 40hp Johnson Model #RKL29E and the prop looks like the original. I want to replace it, but apparently it is next to impossible to find a pin drive prop for this motor. I also need the pin since the one that was in there is missing. Any suggestions would be greatly appreciated.

 

[moyster]

Re: Prop for a 1967 40HP pin drive

You can find the prop here: http://www.propcopropellers.com/evinrude_Outboard_Prop.htm and the pin here: http://www.crowleymarine.com/johnson-evinrude/parts/41486.cfm. The Crowley catalogs only go back to 68, but parts like the pin for the prop, from what I experienced when rebuilding a 33HP recently, were used throughout multiple models and years.

 

[Frank Acampora]

Re: Prop for a 1967 40HP pin drive

You can find them all the time on ebay. aluminum and bronze. the pin is 1/4 inch. Go to the locak Home depot or Lowes and but a long 1/4 inch stainless steel bolt. Cut off the head and threads and use the body.