prop install ?

[nash1970]

Ok I installed my spare prop I just dont know what to tourqe the nut down to . The motor is a 1996 Suziki DT115 .

 

[BoatNoobie]

Re: prop install ?

most are 50-55lb ft

 

[nash1970]

Re: prop install ?

Well I did what everyone should do ,I bought the Clymer manual t says 37 to 44 ft lbs .

 

[RicMic]

Re: prop install ?

Don't obsess on that one, nobody carries a torque wrench in their boat.

 

[sethjon]

Re: prop install ?

When you snug up the nut it won't go much further so the torque doesn't really matter. Make sure you put the cotter pin in.