Proper Tying Techniques in Slip Outboard

wkolbe

Recruit
Joined
Jun 30, 2008
Messages
2
I have been in a small private club marina with 42 slips.. We have a boat chairman and everyone helps each other out.. I have not seen any formal
"Marina Rules". I have a small 18 foot skiff next to me with a Mercury outboard. I back in with my 27 foot Larson and my bow is tied to two front poles. I cross my lines at the back to secure my boat from shifting. He pulls his boat in forward and his stern does not extent beyong the poles. He DOES NOT cross his back lines from his cleat to the poles. He say he can't because the lines will damage his motor. I say Marina rules are that lines must be crossed so that during storms and high water boats will not crash into the next boat.
I found many black marks on my boat which came from his hard rubber rub rails. I recently asked him to cross his lines at the stern and he refused.

Is there a set of proper tying rules out there I can find and show him how to properly secure his boat.

The last 2 marinas I was in required us to back in and cross our lines to the poles and a spring line.. Minimum tying requirments.

HELP!!
 
Last edited by a moderator:

tx1961whaler

Vice Admiral
Joined
May 31, 2008
Messages
5,197
Re: Proper Tying Techniques in Slip Outboard

Take it up with the management and let them handle it. That's what you're paying them for.
You've tried with the owner, and he's blown you off.
If the marina doesn't do anything, move elsewhere or get more bumpers for your boat (or his....).
 

Stachi

Lieutenant Commander
Joined
Jul 14, 2009
Messages
1,671
Re: Proper Tying Techniques in Slip Outboard

I agree ...this is the managements problem...let them handle it...show them the dammage to your boat...
 

Lrider

Chief Petty Officer
Joined
May 19, 2010
Messages
631
Re: Proper Tying Techniques in Slip Outboard

Was going to say the same thing earlier but held my tongue ;)
 

Home Cookin'

Fleet Admiral
Joined
May 26, 2009
Messages
9,715
Re: Proper Tying Techniques in Slip Outboard

spray paint his rubrails with white paint, on your side.
 

Mike Robinson

Senior Chief Petty Officer
Joined
Jun 29, 2005
Messages
752
Re: Proper Tying Techniques in Slip Outboard

Until you get this resolved maybe you can put out fenders to protect your hull.
 

Philster

Captain
Joined
Sep 15, 2009
Messages
3,344
Re: Proper Tying Techniques in Slip Outboard

When someone is wrong and irrational, there is no real argument/rationalizing that will ever make them become rational.

Take it up with the marina boss, and do it 'without apology' as I say. Negotiations and reasoning with an irrational person will result in you questioning your own sanity.

Certain disputes are best left to someone in charge, who has a 'rule book' so to speak.

I had a similar problem years ago. The marina moved the idiot.
 
Top