Raw Water Pump #

[Silverton34c]

Pulled my raw water pump yesterday as it was dripping out the weep hole by the bearings. There are no numbers on the housing to designate its replacement. I have a 5.0 GI PEFS. Ideas for a replacement part number?

Thanks so much for everyone's help!

 

[dannys2004glastron175mx]

your part ## for pump is 21214599

 

[dannys2004glastron175mx]

If you want to rebuild your pump here the bearing and seal you need http://www.ebay.ca/itm/400841416543?...84.m1423.l2649

http://www.ebay.ca/itm/190595640754?...84.m1423.l2649 I think there a video on youtube that will help

 

[Silverton34c]

Thanks for the fast reply...I do not have a press...shade tree mechanic...looking to buy a rebuilt one...

 

[dannys2004glastron175mx]

Thanks for the fast reply...I do not have a press...shade tree mechanic...looking to buy a rebuilt one...

you don't need a press jest a 3 jaw puller

 

[dannys2004glastron175mx]

Its pretty easy to rebuild . Here's a video it should help you out .https://www.youtube.com/watch?v=42kDrdKFbNs

 

[Silverton34c]

It appears you are very familiar with this motor...Would you happen to know the serpentine belt (old numbers worn off) and the fuel filter #(old numbers worn off)?

 

[dannys2004glastron175mx]

It appears you are very familiar with this motor...Would you happen to know the serpentine belt (old numbers worn off) and the fuel filter #(old numbers worn off)?

your filter is 3862228 and belt is 3860086

 

[Silverton34c]

Thank you very much

 

[dannys2004glastron175mx]

Thank you very much

your welcome . Glad I could help .

 

[bruceb58]

go to a site like marineengine(dot)com and look at the 2000 model and you can see all your part numbers.

Your "EF" model corresponds to 2000 model year.

 

[Silverton34c]

Thanks