re : green 47 elgin

[jaybow]

Well I finally made it back , I'll spare all the details.
replyto greespike: Your info proved good. I built a knocker type puller and applied some judicious heat and was able to remove pivot pin. Thus accessing slotted nut on front long bolt. Sliding vane. Contacted co. in Houston,Tx.: Triple A Plastics, Ph.1-713-956-6457, for DELRIN ,it is onthe way.

THANKS MUCH

snuffbucket

 

[the machinist]

Re: re : green 47 elgin

If you need more info, go to my article on restoring these motors
http://www.sschapterpsa.com/ramblings/Sleeping_2.5hp_Elgin.htm

 

[jaybow]

Re: re : green 47 elgin

If you need more info, go to my article on restoring these motors
http://www.sschapterpsa.com/ramblings/Sleeping_2.5hp_Elgin.htm

Thanks machinist. Very Cool Site.
Spent the summer of '61 in Bremerton , Puget Sound, gettin my boats bottom scraped . USS HANCOCK CVA 19. BT3.

I got your number, see ya'

jaybow