Replacement tachometer output cable from Mercury Quicksilver controls?

[ironring1]

I have a Mercury 50HP ELHPTO (1999) and a classic quicksilver control box. The 5-pin tachometer output from the controller is corroded and missing a pin. Can anyone tell me what the proper replacement connector is?

 

[Chris1956]

Gee, I looked a bit on the web and did not see one. If you find a Mercury parts place, they may have a breakdown on the connector on the boat wiring harness.

Alternatively, get some good marine bullet connectors and cut off both connectors, and use the bullet connectors instead.

 

[Scott Danforth]

the connector itself comes in the harness. from a sealing point of view, they sort of suck.

I personally would swap that connector with a Deutsch or Amphenol DT/AT series connector