restoration

[rf6811]

I have (what I believe to be) a 1956 Johnson 10HP Seahorse. The serial number is 1749510, Model QD-19. The cowling is white with red "flames".<br />The motor still fires each season after 2 or 3 pulls and runs like brand new.<br />What I am looking for is new decals, a front emblem and I also wish to repaint the cowling. I would also like to find a new/used pull cord handle.<br />This is totally new for me, but I want to do this for my father. He bought the boat/engine in 72 or 73 and I have recently inherited it. There are a lot of memories in that boat and I know he would love to see it all restored.<br />I could also use some help on getting paint and decals for a 1970 14' Crestliner.<br />Thank you much, any help would be greatly appreciated.<br />rf6811

 

[JB]

Re: restoration

You are close, RF. Your QD-19 is a 1958.<br /><br />Good luck.

 

[skeets]

Re: restoration

rf6811<br />Here is an address that you that you might use for Decals<br />Decal Headquarters<br />12607 Ocean Gateway<br />Cordova, Md 21625<br />Good luck

 

[SeaHorse]

Re: restoration

Get your paint and decal glue here.<br /> web page

 

[Chinewalker]

Re: restoration

Also, consider joining the Antique Outboard Motor Club. Your motor is considered a classic by most collectors (1951 to 30 years ago). You might have to be creative in some restoration aspects, as not everything is being reproduced - particularly the front plastic emblem. Check eBay for hoods/cowlings etc. and you might luck onto a good one. Also, scour your local marinas - slip the mech a sixer of his favorite brew/soda and see if he'll let you scrounge around the boneyard...<br />- Scott