sea doo speedster 150 for wakeboarding

C

cardioreo

Cadet
Joined
Jun 28, 2011
Messages
6
Hello there))
i am from Ukraine)
I just purchased a used 1996 Sea Doo Speedster with twin Rotax 717 engines. The boat is in reasonably good condition. I want to ask you could I put a tower for wakeboarding on it? and is this boat good for wake? not professional level, just for family and friends.
Thanks)
 
B

brick75

Petty Officer 1st Class
Joined
Apr 21, 2010
Messages
289
Re: sea doo speedster 150 for wakeboarding

I would assume someone out there would make a tower to fit one of those. What you need to do is measure the beam width so you can look at some universal towers to see if it falls within the useable size. Then check to be sure you can access the inside area of the boat where the feet would attach to the sides.

As far as the wake goes, I don't think you'll be all that happy with it. Given that wake size is determined by the size and weight of the boat, this little guy isn't going to give you much. I saw a video of one of these running on youtube, and there wasn't much wake at all. Similar to a waverunner. You might be able to improve it with some ballast weight, but not sure you have anywhere to put it in one of these, or if it is safe to do with one.
 
You must log in or register to reply here.
Top