Shift Handle

[Stingrayrulz]

I am trying to recover my boat panels, and I need to get the handle off the shifter to get to the bolts,its a mercruser i/o. I see there is a small gruve on the bottom of the handle, but can`t see what I need to get it off,any help would be appreciated thanksd

 

[WillyBWright]

Re: Shift Handle

There will be an allen setscrew holding it to the pivot shaft. The lever has to be in a specific location to align the slot on the handle with a slot in the faceplate. Put the handle in throttle-only mode and feel for it with an allen wrench as you move the lever, or you might get lucky and be able to see if if the upholstery isn't too puffy.

 

[Stingrayrulz]

Re: Shift Handle

Cool thanks for your help8)

 

[Stingrayrulz]

Re: Shift Handle

I got the set screw out no problem but the handle still won`t come off:'(

 

[QC]

Re: Shift Handle

If it is the "classic" 3000 control actually I think the allen screw is for adjusting tension. If it is what I think it is, you need to get the neutral button out. Feels like you're breaking it, but it will pop out with a screwdriver underneath. Like Willy said, I believe it needs to be in the neutral position (button in) and the handle moved forward halfway. Then there is a big nut/screw, I think 5/8" or more below the plastic neutral button. You can get to it with a regular length socket and extension. That has to come off, then the handle will pull out along the shaft.

 

[Stingrayrulz]

Re: Shift Handle

Thanks I`ll go try that right now,and yes it is a classic 3000.

 

[Stingrayrulz]

Re: Shift Handle

Thanks alot guys for the help!!! It came right off, and your right it did seem like I was going to break the buttond

 

[QC]

Re: Shift Handle

Kewl, glad I could help!!

BTW, welcome to iboats!! Stick around, lots more info than how to break a button . . . 8)