Subject for Seahorse.

[JC1933]

In my thread on ( cam roller sleeve) of may 6<br /> I would like to know if I should exchange the #30 and # 31 jets to the #33 that are standard in the parts manual, also should I make a sleeve for the cam roller I don't see a parts # for this sleeve could it be that this model does not require one? Thanks in advance.

 

[OBJ]

Re: Subject for Seahorse.

Claude...you should bring everyone up to date on this or use the other thread. May 6 is a ways back. What's the year and hp of the engine?

 

[rickdb1boat]

Re: Subject for Seahorse.

Thread

 

[JC1933]

Re: Subject for Seahorse.

Thanks OBJ,<br /> I tried bumping my thread to the top three different times with no results, this is why I did it this way. If you don't mind would you read my thread?<br /> Rick has posted my thread above my explanation.<br /> Thanks Rick.

 

[jrem]

Re: Subject for Seahorse.

Hi Claude,<br />Seahorse gave you the part# for the cam roller in your last thread. <br />(part # 432639- ROLLER, Cam Follower)<br /><br />I had to order one a few weeks ago myself, and found it on Marineparts. I did a search on there for your part number and they have it for about 5 bucks.<br /><br />They require a minimum order of about $25 though. <br /><br />Hope this helps!

 

[JC1933]

Re: Subject for Seahorse.

Hi jrem,<br />What i am trying to find out is does this cam roller have a sleeve on my model does it need one?<br />Also I have two idle jets in my carb's #31 and #30 the parts book have # 33 as standard w<br /><br />wondering if it would help to change to # 33<br /> thanks for your input.