muhamad.herman
Recruit
- Joined
- Aug 13, 2012
- Messages
- 3
Hello guys, manage to open new thread on my project. Am starting the restoration process by early of this month. Due to workload of my job, manage to work 2 - 3 hours per day during workdays and maybe 5 - 7 hours in the weekend.
Work scope on the project:
TRAILER
1. Remove and cut damage area of my trailer and reinforce.
2. Replace damage rollers or change to bunk type.
3. Replace hub bearing.
4. Repaint (white).
BOAT
1. Remove rotten and damage area of the floor board+stringers.
2. Replace floorboard using honeycomb board.
3. Rebuilt the cabin.
4. Replace seat cover and new seat box.
5. Rewiring the boat.
6. Repaint.
ENGINE
1. Conduct compression test.
2. Change gear oil.
3. Change water impeller.
4. Rebuild hydraulic trim cylinder.
Will update with pictures while on progress. Guidance and tips are most welcome since this is DIY project and I don't have any background knowledge of doing this except tons of videos from a YOUTUBE. Lol...
Work scope on the project:
TRAILER
1. Remove and cut damage area of my trailer and reinforce.
2. Replace damage rollers or change to bunk type.
3. Replace hub bearing.
4. Repaint (white).
BOAT
1. Remove rotten and damage area of the floor board+stringers.
2. Replace floorboard using honeycomb board.
3. Rebuilt the cabin.
4. Replace seat cover and new seat box.
5. Rewiring the boat.
6. Repaint.
ENGINE
1. Conduct compression test.
2. Change gear oil.
3. Change water impeller.
4. Rebuild hydraulic trim cylinder.
Will update with pictures while on progress. Guidance and tips are most welcome since this is DIY project and I don't have any background knowledge of doing this except tons of videos from a YOUTUBE. Lol...