frustratedboater
Chief Petty Officer
- Joined
- Jul 10, 2007
- Messages
- 489
I have a 2007 Suzuki df250Z and just completed a head job on it. The powerhead is just about complete and finishing the last few connections. I am stuck on a small black water line in the rear of the powerhead. Can anyone ID this and let me know where is connect to?
The lines are located to the back water inlet union just inside the cover right by the rear latch. There are two other lines connected to a white 3-way union and the the middle line (about 2.5' long) I am not sure where it connects. I usually label everything, but this did not have one. It looks like it has a bent memory to it and seems to want to go by the oil dip stick area, but the end only goes to the shift cable area.. Can anyone identify where this connects to, or drain out to? The pics are not the best... Thanks..
The lines are located to the back water inlet union just inside the cover right by the rear latch. There are two other lines connected to a white 3-way union and the the middle line (about 2.5' long) I am not sure where it connects. I usually label everything, but this did not have one. It looks like it has a bent memory to it and seems to want to go by the oil dip stick area, but the end only goes to the shift cable area.. Can anyone identify where this connects to, or drain out to? The pics are not the best... Thanks..
