Tilt/Trim OMC Cobra

jjuliani

Cadet
Joined
Jul 1, 2004
Messages
8
I have a 1995 Four Winns with a 5.0 OMC Cobra Outdrive.<br /><br />I have an intermittent problem. When I adjust the trim, up or down it kills the engine.<br /><br />Any ideas as to what could cause this problem.
 

Bass Runner

Senior Chief Petty Officer
Joined
Apr 2, 2004
Messages
746
Re: Tilt/Trim OMC Cobra

Sounds like a short in the t/t, check the breakers on the front of the motor, chase the wires may have a bare spot on one of them. Welcome to the forum.
 

jjuliani

Cadet
Joined
Jul 1, 2004
Messages
8
Re: Tilt/Trim OMC Cobra

Thanks<br /><br />I thought the up and down trim functions where on two seperate circuits, and since it does it in both directions i thought I could rule out a short, but I will check.
 

jjuliani

Cadet
Joined
Jul 1, 2004
Messages
8
Re: Tilt/Trim OMC Cobra

Thanks<br /><br />I thought the up and down trim functions where on two seperate circuits, and since it does it in both directions i thought I could rule out a short, but I will check.
 

Mod2

Senior Chief Petty Officer
Joined
Jun 19, 2003
Messages
713
Re: Tilt/Trim OMC Cobra

Moving to I/O forum.
 
Top