Tilt/Trim on Merc 115

LCSD147

Cadet
Joined
Aug 18, 2010
Messages
6
Hello all, The tilt/trim on my 03 Merc 115 Saltwater quit working. I raised the motor a few inches when a trailer tire was going flat and after changing the tire a week later, nothing. Boat was sitting in my carport with the cover on it. I have power to the solenoids and they both "click", and there is power at the trim motor. I took the trim motor apart and it does not appear to have any burnt windings. I hate to start replacing parts until it starts working again. All help appreciated.
 

Wingedwheel

Lieutenant Junior Grade
Joined
Jun 16, 2009
Messages
1,071
Re: Tilt/Trim on Merc 115

If you have power to the motor, I'd suspect it may have gone out. Did you try to bypass the relays and go directly to the solenoids?
 

LCSD147

Cadet
Joined
Aug 18, 2010
Messages
6
Re: Tilt/Trim on Merc 115

Didn't try that yet. Hoping it's not the motor at $483 for the part. :eek:
 

LCSD147

Cadet
Joined
Aug 18, 2010
Messages
6
Re: Tilt/Trim on Merc 115

Yep, it was the trim motor, got an Arco for $288. Could have put it on myself if I had access to an engine lift to get the motor off the transom bit I didn't so I paid the local shop $120 to install it for me. Nine years old and the first time it's been to a shop so I guess I'm lucky.
 

Wingedwheel

Lieutenant Junior Grade
Joined
Jun 16, 2009
Messages
1,071
Re: Tilt/Trim on Merc 115

Glad you got it fixed. Enjoy your time on the water.
 
Top