GreatDANE
Cadet
- Joined
- Apr 28, 2008
- Messages
- 8
Hello everybody, I have a 75' 135 evin. with a tilt problem. I looked all over north america to find a tilt motor for this application, but could not, so i did what i could and imprivised. I took my elec. motor from my fishing boat and welded the shaft from the old one to the new one and placed it in the pump, it worked perfectly and whisper quiet too!
My problem is that my older system did not come with any solenoids or relays(this is why it failed in the first place) so my new motor is a 2 wire, both ground and power depending on which direction, do I need 2 or 3 solenoids, and if u have any diagrams this would be helpful too..... dane_nielsen@hotmail.com thanks for the help.
My problem is that my older system did not come with any solenoids or relays(this is why it failed in the first place) so my new motor is a 2 wire, both ground and power depending on which direction, do I need 2 or 3 solenoids, and if u have any diagrams this would be helpful too..... dane_nielsen@hotmail.com thanks for the help.
