trim not working on my 2012 evinrude 90 etc

[perry barras]

lefted for the storm and my buddy trimmed my motor all the way up and now it will not trim down. i used the manual release and it came down ,tighten it and tryed the trim up nothing motor works the relay works and i have a fresh battery so what could be the problem? i manualy lifted the motor re tighten the manual screw again and stood on the calvation plate and tryed trimming again nothing . need help..

 

[Chris1956]

Re: trim not working on my 2012 evinrude 90 etc

Does the trim motor run? If so bleed it. If not test it.

 

[woody66912]

Re: trim not working on my 2012 evinrude 90 etc

Don't mess with it, It's under warranty.

 

[boobie]

Re: trim not working on my 2012 evinrude 90 etc

+ 1 0ne on that. Take it to a dlr.

 

[perry barras]

Re: trim not working on my 2012 evinrude 90 etc

check this out i brought my boat to another evinrude dealer and they hooked me up with a whole new trim tilt unit!!! best of all i dropped the boat off and 3 hrs later he calls and says its ready WOW! Ill be slaying the trout this weekend

 

[perry barras]

Re: trim not working on my 2012 evinrude 90 etc

hey i won the caption contest on evinrudes facebook . free evinrude gear .. what a day..

 

[boobie]

Re: trim not working on my 2012 evinrude 90 etc

Aren't you glad you bought an E-TEC ????????????

 

[perry barras]

Re: trim not working on my 2012 evinrude 90 etc

Aren't you glad you bought an E-TEC ????????????

yeap only power ill buy..

 

[woody66912]

Re: trim not working on my 2012 evinrude 90 etc

Make sure you send them a e-mail thanking the tech's, the ones that pulled t n t unit off a showroom engine (probably) and got you back on the water in record time. They are the unsung hero's.