Cool Brees
Cadet
- Joined
- Jul 23, 2010
- Messages
- 6
I just got a new boat (to me) this past weekend. Had it down to two Models. 2000 Bryant Bowrider and 2000 Ebbtide Bowrider both are 21? feet same drive V/P 5.0Gi SX drive. Went with the Ebbtide, boats are about the same quality, Ebbtide had a little better layout and extras, plus the wife liked blue better than green.
Philster had it right on boat runs 55.2 @ 4800 rpms. GPS.
Anyways I am having a problem with the trim switch. It sometimes gets stuck when I am adjusting the trim. It is the switch lever itself (on the throttle) getting stuck in the trim up position. If I click it back down it will stop. While I can certainly operate it like that, I prefer not to. I was standing at the dock last night with the WD-40 in hand ready to spray some into the lever but then decided to ask here if this was the prudent thing to do.
Thanks
Philster had it right on boat runs 55.2 @ 4800 rpms. GPS.
Anyways I am having a problem with the trim switch. It sometimes gets stuck when I am adjusting the trim. It is the switch lever itself (on the throttle) getting stuck in the trim up position. If I click it back down it will stop. While I can certainly operate it like that, I prefer not to. I was standing at the dock last night with the WD-40 in hand ready to spray some into the lever but then decided to ask here if this was the prudent thing to do.
Thanks
