VP SX-C trim ram hardware kit

[Scubacruiser]

I pulled my boat home from storage last night and found one of the locknuts on the trim rams was broken in half. Most of the trim ram pivot bushings look kind of old so I'm wondering if there is a bushing/hardware kit available. This is for a 1994 VP SX-C.

 

[Scubacruiser]

I work for a national hydraulic company so the rams are coming in to replace the seals. But I want the replace the bushings when I reinstall. Plus, I obviously need a new locknut.

 

[Scubacruiser]

About $5 in o-rings and my trim cylinders are resealed. Still looking for bushings and locknuts.