***WANTED*** SHOP/REPAIR MANUAL

[hoytheld]

I need a repair/shop manual for a 1962 Volvo 4 cyl engine and stern drive unit. Either need a used one to buy or a location to buy a new one. Thanks
Jason

 

[bobboater1]

Re: ***WANTED*** SHOP/REPAIR MANUAL

look on amazon.com or ebay

 

[Don S]

Re: ***WANTED*** SHOP/REPAIR MANUAL

You can order brand new ones from ;your local Volvo Penta dealer, They cost 20 bucks each one for the drive and one for the engine.
I could give you the Volvo PN's, but would need to know the model number of the engine and drive.

 

[hoytheld]

Re: ***WANTED*** SHOP/REPAIR MANUAL

You can order brand new ones from ;your local Volvo Penta dealer, They cost 20 bucks each one for the drive and one for the engine.
I could give you the Volvo PN's, but would need to know the model number of the engine and drive.

Don,
Where would the location of the model numbers be on the engine and outdrive?

 

[Don S]

Re: ***WANTED*** SHOP/REPAIR MANUAL

Ya got me, I've never even seen a Volvo that old :%

Go to the link below and see if any of the early AQ series are what you have.

http://www.volvo.com/volvopenta/glo.../outofproductionengines/gasengine/sterndrive/

 

[hoytheld]

Re: ***WANTED*** SHOP/REPAIR MANUAL

Ya got me, I've never even seen a Volvo that old :%

Go to the link below and see if any of the early AQ series are what you have.

http://www.volvo.com/volvopenta/glo.../outofproductionengines/gasengine/sterndrive/

Don
Looking at the pics...it appears to be an AQ80

 

[mkast]

Re: ***WANTED*** SHOP/REPAIR MANUAL

Believe it or not, I have a 1963 AQ 80. The hull is a 1963, I think the engine is a 62'. I have the engine and sterndrive manuals. Email me, if I can find them I'll email copies.

 

[brummerh]

Re: ***WANTED*** SHOP/REPAIR MANUAL

Good morning,

I believe i can sedn you a PDF file with teh information you need. Pls send me your contact to brummerh@hotmail.com, so that i can sedn it.

HB

 

[hoytheld]

Re: ***WANTED*** SHOP/REPAIR MANUAL

Brummer...sent you an Email

Email me ant info :
hoytheld@yahoo.com

Thanks guys!

 

[hoytheld]

Re: ***WANTED*** SHOP/REPAIR MANUAL

HB,

Thanks for your time today...awsome!!!!

Jason