Water in the lower unit?

[tackett77]

I have a 6hp wards sea king. The model is tag is missing but the best I can tell it is a 1972(ish). I got it last fall and finally got it started. Warmed up and ran great. The water pump was working well and everything ran fine. After I ran it I checked the oil in the lower unit and had water come out and a little oil. I know I will need to add oil but am not sure of what kind since I don't know the model number. Also, why is water in the oil? Any help would be greatly appreciated. Thanks!

 

[F_R]

No Title

It obviously needs new seals. There are several. Do all of them. It sure would help if you could identify your motor. Do either of these look familiar?

 

[tackett77]

It looks pretty similar to the first picture. I checked again this morning and the drain plug didn't have a gasket/seal on it. I'm going to get one and try again.

 

[tackett77]

I thought that solved the problem but it didn't. How do I go about getting the gaskets for the motor if I don't know the model? Thanks for any info!