Puzzled look
Seaman Apprentice
- Joined
- Jun 3, 2009
- Messages
- 36
Hi
I have a Johnson 90hp V4 2000 model.
Model No: BJ90 TLE RC
Engine No: GO35 88 764
The engine doesn't seem to idle so I want to take the carb off and clean the jets, whilst I'm doing this I might as well replace all of the gaskets etc.
I have looked on the I boats shop and found the right gasket kit but there are two options. I'm not sure what the difference is. Below is the link.
http://www.iboats.com/mall/partfind...gd_poid=109346&gd_row=73&**********=473034449
Can anyone shed any light on the options?
Also last year I changed the float and gaskets on my mercury 20hp and some one on here sent me an exploded diagram of the carb which was very helpful if one of these is available for my Johnson engine I would very much appreciate a link.
Many thanks
Martyn
I have a Johnson 90hp V4 2000 model.
Model No: BJ90 TLE RC
Engine No: GO35 88 764
The engine doesn't seem to idle so I want to take the carb off and clean the jets, whilst I'm doing this I might as well replace all of the gaskets etc.
I have looked on the I boats shop and found the right gasket kit but there are two options. I'm not sure what the difference is. Below is the link.
http://www.iboats.com/mall/partfind...gd_poid=109346&gd_row=73&**********=473034449
Can anyone shed any light on the options?
Also last year I changed the float and gaskets on my mercury 20hp and some one on here sent me an exploded diagram of the carb which was very helpful if one of these is available for my Johnson engine I would very much appreciate a link.
Many thanks
Martyn
I haven't took it apart yet as I have only just got it! I assumed that it might, Ill get 2 kits anyway to be on the safe side.