RIDEPATE
Petty Officer 1st Class
- Joined
- Jul 8, 2001
- Messages
- 324
93 OMC 5.0 F.I. The gauge does not respond to trim settings, at all. Stuck-on full-up except when I turn on the Nav-Lts (Not anchor,same switch) or blow the horn. It goes then down to about 1/4 up until I turn on the ingnition, then back to full-up. I'm suspect of a ground problem or it's getting back-fed somehow. I thought about isolating the ground to the gauge and seeing what happens. Other ideas??
Jimbo
Jimbo