Latest activity

  • jimmbo
    jimmbo replied to the thread 85hp Merc?.
    About 5-6 mph higher top speed
  • tg3690
    tg3690 reacted to redneck joe's post in the thread Random with Like Like.
    We have old timers day evey October. Small town fun, parade, etc. Needed a place to set my smoked sausage and beer.
  • tg3690
    tg3690 reacted to redneck joe's post in the thread Random with Like Like.
  • M
    mike_i replied to the thread Lowrance warranty.
    Agree with Mc Tool, I was going to same the same thing. It may be a voltage issue. Confirm you have a good steady 12v supply.
  • tg3690
    tg3690 replied to the thread 120hp Force year?.
    Looks like this. This one was behind the CD unit on the block.
    • IMG_1397.jpg
  • tg3690
    tg3690 reacted to Nordin's post in the thread 120hp Force year? with Like Like.
    The Force 120Hp came in 1990 and as it has the Force style LU and not the Mercury style it is an 90-94 year model. From my experience...
  • R
    Oil may be thicker in cold , cold weather.----There may be a " gel " at the bottom of the tank.----This would limit oil flow through the...
  • S
    Good day. First post and I did a little searching first....... I am looking to charge a 100AHr LiFePO4 via an Inverter and Battery...
  • Lou C
    Lou C replied to the thread Bellow condition??.
    I have found that the older all rubber (if OEM) Cobra/Volvo SX bellows (same part I think) lasts about 10 years before you start seeing...
  • flyingscott
    I run mine in November with ice on the water, why should I check my VRO?
  • J
    Jeff J replied to the thread Tongue weight musings.
    Incorrect. It don’t know how far it would have dropped because I put a block under it but the hitch came 8 or so inches off the ball.
  • flyingscott
    the VRO/OMS pumps are extremely easy to test. you dont even need to remove it from the motor! Just need to remove the fuel out hose, and...
  • Scott06
    Scott06 replied to the thread Bellow condition??.
    I had similar experince with my merc alpha gen 2 I changed them at 18 years as they were just stating to get real stiff. Never leaked...
  • ESGWheel
    ESGWheel replied to the thread Water pump leak?.
    Follow up to my above comment: when it comes to critical parts (i.e. parts associated with cooling and ignition) recommend you stick...
  • redneck joe
    redneck joe replied to the thread One last try.
    Need to wnd your career like this... https://www.facebook.com/share/r/17SaQ2SM8q/
Top