engine ignition swith

[peacock111963]

need help!
my friend gave me evinrude/selectric shift, but i don't know what year and i took off from the boat, i forgot to take off the control box, i have another control box. do i need to buy hold control box or only the switch for engine.
please, help? modl # 758443d + ser # e02965 + 75hp starflite 4

 

[tashasdaddy]

Re: engine ignition swith

you need an electric shift control designed for that motor. there are several different electric shift controls for several different designed motors. try to go back and get the original box.

looks like it is a 1964.

 

[peacock111963]

Re: engine ignition swith

that boat had been destroyed. what I do with it and I don't know the engine run or not? Hard to think.

 

[tashasdaddy]

Re: engine ignition swith

using pumper cables, you can ground the motor to the neg post on battery, then pos post on battery and touch wiring bolt or starter, it will run with out the controls. you will have to choke it to kill the motor. that year also has a area on the flywheel so you can rope start it.

then you need to be junction box and controls.

 

[peacock111963]

Re: engine ignition swith

I have all wire from motor to the control box next the wheel, I think. I need ignition switch to hook-up all the wires and turn the key to start. how do you thinks?

 

[tashasdaddy]

Re: engine ignition swith

i've got a manual up to 40hp, for that year, so i have no idea where the wires go. but you need a 5 pole ignition switch.http://www.iboats.com/Omc_Ignition_...4929130--**********.621208217--view_id.271407

this is the best i can do, and don't know if it is right.
http://continuouswave.com/whaler/reference/ignitionSwitch.html

 

[peacock111963]

Re: engine ignition swith

Thanks For Your Help.