FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
Not likely.To get a perfect hone you must have the steadiness of an Olympic sharpshooter. This is clearly a case where going on the cheap will turn out to be the most expensive.
I concur. Spend the $40-$50 bucks to have it bored correctly. Nothing like buying oversize pistons & rings, and new gaskets, only to have a ring catch a port or the pistons stick first time out. Cheap? I think not...
- Scott
If its the 99 6hp you have , junk it. The oil pump is not avaliable say's BRP site. I would not rebuild it unless I could replace pump. My $.02.........
I just had my cylinders bored out .030 on my 60HP. Came out really well...I blew up a piston and scuffed up one cylinder really bad, but all three cylinders were pretty worn out.
