1963 Johnson 10hp

[mtfisher]

I was just given a 1963 Johnson 10hp (Model#QP-24B) outboard and it had a little play in the prop. I pulled the entire lower unit apart and cleaned it in its entirety. The lower seal is shot and there are a couple other parts I would like to replace as I am putting the thing back together, can anyone tell me where I can get a schematic for this entire motor so I know exactly what parts it is that I am looking to replace?
Thanks

 

[tashasdaddy]

Re: 1963 Johnson 10hp

http://www.iboats.com/Johnson_Manua...ategory--**********.165602389--view_id.393633

 

[JB]

Re: 1963 Johnson 10hp

nit picking, that is a QD-24

 

[AndyT]

Re: 1963 Johnson 10hp

If we're nit picking, a QD-24 is a 1962.

 

[jbjennings]

Re: 1963 Johnson 10hp

Actually, I believe a QD-24 IS a '63. i.e. '53 = QD-14 '56 = QD-17
I like to nit-pick a little, too.
just messin' with ya'
JBJ

 

[eavega]

Re: 1963 Johnson 10hp

According to the service manual, the QD-24 is a 1963. Stands to reason since my QD-21 is a 1960.

If we are nit picking...

-E

 

[AndyT]

Re: 1963 Johnson 10hp

You're right! I just looked it up. I thought because my RKL-25 is a '63, your's must be a '64.

 

[samo_ott]

Re: 1963 Johnson 10hp

My manual says a QD-24 is a '63.

 

[mtfisher]

Re: 1963 Johnson 10hp

Ok you guys got me and it is a QD-24, does anyone know what the B is for? When i looked it up it said it was a 1963 so thats what i am going off of. Is there a entire motor diagram in the manual that calls out which parts are which? Also what is the fuel mixture supposed to be for this particular motor?

 

[eavega]

Re: 1963 Johnson 10hp

The service manual contains exploded views of the major systems, although I have found a few differences between what the manual shows and what is actually in my motor. Between the OMC service manual and the Seloc service manual, you get a pretty accurate picture of what is in there.

The correct mix for this motor is 24:1

-E