1986 Mercury 115 hp decarbonize

cheers731

Petty Officer 3rd Class
Thread starter
Joined
Jul 4, 2009
Messages
85
Hi folks,

Just bought a boat with a 1986 Mercury 115 hp 6 cylinder outboard. I used to deal with I/O setup and this is my 1st outboard and need help to build a quick learning curve. The engine is running strong but with lots of blue smoke. I plan to do decarbonize using Seafoam but not sure where to spray in or should I add it to the fuel. I will replace spark plugs afterward.

Any tips or advice are appreciated greatly.
 

bilge rat jim

Petty Officer 1st Class
Joined
Jun 28, 2012
Messages
330
Stay away from SeaFoam- it only contains alcohol, naptha and mineral oil. If you want a good de-carboning agent, try Yamahas' Ring Free plus, or a Chevron product called Techron. Both contain Benzene and zylene, good carbon desolvers. I'm sure there are other good carbon removers on the market, but I have had good success with both Ring free and Techron. Sorry, but SeaFoam is snake oil.
 

Chris1956

Honorary Supreme Mariner
Joined
Mar 25, 2004
Messages
29,255
Cheers, Blue smoke from a 2 cycle motor is good.....Not many would critize Seafoam like Jim. Most think it is a good product. There is a sticky somewhere explaining how to decarbonize. I would recommend you run it for a while to get some experience with it before you decarbonize.

Normally you would change the gear oil and waterpump. They are the same ( or real similar) as on an Mercruiser. Also, do not forget to mix your fuel at 50::1.....
 

bilge rat jim

Petty Officer 1st Class
Joined
Jun 28, 2012
Messages
330
Cheers, Blue smoke from a 2 cycle motor is good.....Not many would critize Seafoam like Jim. Most think it is a good product. There is a sticky somewhere explaining how to decarbonize. I would recommend you run it for a while to get some experience with it before you decarbonize.

Normally you would change the gear oil and waterpump. They are the same ( or real similar) as on an Mercruiser. Also, do not forget to mix your fuel at 50::1.....
No need to premix the fuel- 1986 models have Autoblend, 1st gen oil injection.
 

cheers731

Petty Officer 3rd Class
Thread starter
Joined
Jul 4, 2009
Messages
85
Thanks for the tips and advice, really appreciate it.
 

wired247

Lieutenant Commander
Joined
Oct 8, 2011
Messages
1,557
FWIW I use the penzoil premium synthetic blend 2 cycle oil. Relatively cheap at $16 a gallon on sale and it doesnt smoke at all.
 
Top