Distributor cap screws

metsfan3197843

Petty Officer 2nd Class
Joined
May 2, 2011
Messages
156
Misplaced the 2 screws that hold down the distributor cap. T-20 torx head mercy part number 10-884786. Can’t seem to find any info on what thread pitch they are so I can buy a couple new ones. Anybody know??
 

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
42,548
There metric, and right now don't remember the number. If one ever gets stripped out, get the next size up and re-tap. This is what I did on mine
 

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
71,082
Ayuh,..... Anytime I lost 'em, I figured it's time for a new cap, that comes with new screws,.....
 

metsfan3197843

Petty Officer 2nd Class
Joined
May 2, 2011
Messages
156
Ayuh,..... Anytime I lost 'em, I figured it's time for a new cap, that comes with new screws,.....

Yeah I tried that route but when you live on an island in the middle of nowhere, parts are hard to find.....unless you own an outboard then everyone in town carries parts😡
 

metsfan3197843

Petty Officer 2nd Class
Joined
May 2, 2011
Messages
156
Thanks for the help guys. After tearing apart the garage I finally found them. Always the last place you look😜😁
 

Fun Times

Moderator
Staff member
Joined
May 16, 2009
Messages
9,120
There metric, and right now don't remember the number. If one ever gets stripped out, get the next size up and re-tap. This is what I did on mine
:thumb:Was curious to know the size in case metsfan3197843 or someone else ever needed it so I went looking and see GM recommends the same idea as they have a few sizes/part numbers shown for trucks that used the same cap design back in 1998...Trying a copy and paste of the info provided below the GM link as I'm not sure if the link would go down after awhile.

https://www.gmpartsgiant.com/parts-list/1998-gmc-c1500/distributor-ignition.html

BOLT, Distributor Cap Retaining Select vehicle options to narrow down result
  • resource

    10457666
    BOLT, DISTRIBUTOR CAP(20 MM LG, W/SCOTCH GRIP, OVERSIZED)(PART OF 1)
    10457666

    Fitting Vehicle Options:CK1(L35)
    Require Quantity:02
    Package Quantity:1


    $8.16
    $4.50
  • resource

    10457666
    BOLT, DISTRIBUTOR CAP(20 MM LG, W/SCOTCH GRIP, OVERSIZED)(PART OF 1)(USED TO SERVICE 10475922 IF THIS HAS BEEN REMOVED SEVERAL TIMES AND CANNOT OBTAIN PROPER TORQUE)
    10457666

    Fitting Vehicle Options:CK1,2,3(L31), CK1,2(L30)
    Require Quantity:02
    Package Quantity:1


    $8.16
    $4.50
  • resource

    10475922
    BOLT, DISTRIBUTOR CAP(M4 X 1 X 13.4, 12.6 THREAD)(PART OF 1)(9.2 OUTSIDE DIAMETER,410 STAINLESS STEEL,GM1000M,TORQUE,MACHINE)
    10475922

    Fitting Vehicle Options:CK1(L35), CK1,2(L30), CK1,2,3(L31)
    Require Quantity:02
    Package Quantity:10


    $1.65
    $0.90

  • BOLT, Distributor Shaft Select vehicle options to narrow down result
  • resource

    10457666
    BOLT, DISTRIBUTOR HALL EFFECT SWITCH(20 MM LG, W/SCOTCH GRIP, OVERSIZED)(PART OF 1)(2.368)(USED TO SERVICE 10475922 IF THIS HAS BEEN REMOVED SEVERAL TIMES AND CANNOT OBTAIN PROPER TORQUE)
    10457666

    Require Quantity:02
    Package Quantity:1


    $8.16
    $4.50
  • resource

    10475922
    BOLT, DISTRIBUTOR HALL EFFECT SWITCH(M4 X 1 X 13.4, 12.6 THREAD)(PART OF 1)(9.2 OUTSIDE DIAMETER,410 STAINLESS STEEL,GM1000M,TORQUE,MACHINE)(2.368)
    10475922

    Require Quantity:02
    Package Quantity:10
 
Top