Muffs

[barnyard]

5.0 SBC, Alpha 1 Gen2
Can I run engine to operating temp with muffs
What max RPM?

 

[alldodge]

Yes
Try not to exceed 1500 rpm

 

[Scott Danforth]

the max RPM depends on your hose supplying it.

most 60 psi residential 5/8" hose should supply enough water flow for 1500 RPM max.

however there will be an RPM where the muffs quit spraying out the sides..... that is when the RPMS have exceeded the water supply. in some cases that may be only 1000 RPM, or with my 100 psi and 3/4" hose, I can hit almost 4500 RPM

 

[alldodge]

^^^ That's funny

 

[Scott Danforth]

I wish I only had 60 psi..... the 100psi keeps the toilets running

 

[alldodge]

Getting of the thread but I have 125 psi at the meter, but also installed a whole house regulator which brings it down to my adjustment of 65

 

[Scott Danforth]

Getting of the thread but I have 125 psi at the meter, but also installed a whole house regulator which brings it down to my adjustment of 65

2-port or 3-port? got a link you can PM me? love the high pressure in the kitchen and the outside faucets, just hate the running toilets.

 

[alldodge]

I'll email you

 

[achris]

2-port or 3-port? got a link you can PM me? love the high pressure in the kitchen and the outside faucets, just hate the running toilets.

PRV on the toilet outlets?

 

[Scott Danforth]

Toilet supply lines

 

[achris]

Toilet supply lines

Yes, the outlets that supply the dunnies.

 

[nola mike]

Yes, the outlets that supply the dunnies.

Dunnies? You did that on purpose.

 

[achris]

Dunnies? You did that on purpose.

Errr, yes... 'Dunnies' are 'toilets' in Arse-tralia...

 

[barnyard]

Thanks for the replies. If I ever have a toilet (dunnies,head) question I will post it here