93 Evinrude SP48

[oldbuzz]

Motor runs fine but I think the linkage is not adjusted correctly and a white sleeve on a link is breaking off.
I need a picture of the linkage in the idle position and a source for the part.
This motor has zero wear and I'll appreciate any advice. It's going on a 22 ft pontoon.

 

[oldboat1]

Post a picture and description so we know what you are talking about. Or post a parts diagram from iBoats with your description (would also give you a parts source).

 

[juno pierrat]

the roller on the carb is # 432639, the one inside the cam lever is #0432572. the linkage adjustments is on a YouTube

"Linkage Adjustments: 1989 and Newer 40, 48, 50 HP Johnson / Evinrude, " a factory vhs tape​

 

[oldbuzz]

the roller on the carb is # 432639, the one inside the cam lever is #0432572. the linkage adjustments is on a YouTube

"Linkage Adjustments: 1989 and Newer 40, 48, 50 HP Johnson / Evinrude, " a factory vhs tape​

Thank you for the part number and the adjustment YouTube. I'm very grateful for this group for sharing expertise that's not available anywhere else.

 

[juno pierrat]

let us know how it turns out, and make sure to get the engine propped correctly for that big boat