airshot's latest activity

  • A
    airshot replied to the thread Hull cleaning.
    Neighbors use "Lysol rust and stain remover" for toilet bowls. Squirt it on, use a soft scrubber like used to get bugs off your...
  • A
    airshot reacted to froggy1150's post in the thread Best way to fasten bow rails? with Like Like.
    Riv nuts/nutserts WILL fail. They are made for sheet steel. You can drill a hole in the center of your rail pad big enough to get a...
  • A
    airshot replied to the thread Boat Cover.
    If you are going to trailer with the cover on, then get a custom made cover....costly yes, but they will last far longer. Already made...
  • A
    airshot replied to the thread Best way to fasten bow rails?.
    When I mounted my tree kickers in my side x side, I used rivnuts and coated the outside with " goop". After it dried they have never...
  • A
    airshot reacted to jimmbo's post in the thread Prop questions with Like Like.
    Going from 4600 to 5500 is going to require quite a drop in Pitch, about 4 inches. I would make sure the Motor is performing at its Best...
  • A
    airshot reacted to jlh3rd's post in the thread Prop questions with Like Like.
    I'd prop it for hitting the higher rpm range, if not the max. Then when I add weight, the motor rpm won't drop below the min.
  • A
    airshot replied to the thread Used or reman outboard.
    Depends on the rebuild....rebuilt to new factory specs, or rebuilt to acceptable running condition...
  • A
    airshot replied to the thread Late 70's to Late 80's - Worth shopping for?.
    You will need to look far and wide, but they are out there. There are some nice used motors if your willing to shop hard, drive long...
  • A
    airshot replied to the thread Are transom and bow caps universal?.
    However, they can sometimes be modified to fit, or the use of shims to make them work. From thevtop, no one will notice the mods.
  • A
    airshot replied to the thread 1986 Mercury 9.8 110 outboard.
    If the plugs are dry, the carb is not letting fuel in, you probably have a blockage that you missed, or compression is low enough to not...
  • A
    airshot reacted to MikeSchinlaub's post in the thread Random with Like Like.
  • A
    airshot replied to the thread 1986 Mercury 9.8 110 outboard.
    If compression is good, then do a rebuild on the carb with a factory rebuild kit as it will give you all the specs for setting it up...
  • A
    airshot replied to the thread 1996 Merc. 40hp 2 stroke.
    My first thought is the battery holding 12.6 v or above ? Sounds like reservoir nay not be full, air lock, or pump going bad.
  • A
    airshot replied to the thread New Journey.
    My 1992 Sylvan has those same hatches and they are still going strong. An occasional wipe with a plastic restoring product and they...
  • A
    airshot replied to the thread Thinking about selling my 90hp 1986 Mercury inline 6.
    Carb issues are carb issues, whether two or four stroke makes no difference, other than four strokes are much more difficult (...
Show older items
Top