Current visitors

Home
Members

alldodge's latest activity

alldodge replied to the thread Windlass Goes Up but not Down.

My Formula had it between the rear of the anchor locker and a panel in the forward cabin. Had to remove the bow panel to access

Jun 26, 2026
alldodge replied to the thread Windlass Goes Up but not Down.

It does have one and that's the biggest issue is finding where they put it Look on page 10 Manual

Jun 25, 2026
alldodge replied to the thread Windlass Goes Up but not Down.

Jun 25, 2026
alldodge replied to the thread Windlass Goes Up but not Down.

It's most likely either the Switch or the Solenoid Switch Solenoid Need to trace connections to find out which

Jun 25, 2026
alldodge replied to the thread [SPLASHED] I/O (Sterndrive) Conversion to Outboards.

They "do not" guarantee the motors that is honda. If after install there are issues honda pays, and they have other things to do that...

Jun 24, 2026
alldodge reacted to Bondo's post in the thread 2003 Crownline oil reservoir fitting with Like.

Ayuh,...... Just as with the older drives, you fill it to the bottom of the top plug, which leaves an air space at the top, for...

Jun 23, 2026
alldodge reacted to Jamz33's post in the thread 2003 Crownline oil reservoir fitting with Like.

I have removed the dribbler valve from the bell housing and will be plugging that hole. I have taken a bell housing gasket and flipped...

Jun 23, 2026
alldodge replied to the thread 2003 Crownline oil reservoir fitting.

Yes/No The drive has a one way valve in the top of the lube bottle. It lets pressure out but not in (at least that what Merc says). Yes...

Jun 23, 2026
alldodge replied to the thread 2003 Crownline oil reservoir fitting.

Water will leak back thru the fitting when boat is stopped and sitting, when running no Could cut outside tube in middle and plug both...

Jun 23, 2026
alldodge reacted to beta's post in the thread 1995 Crownline 202BR Restore with Like.

I put the front piece back in. I ended up putting 1/2" plywood strips from leftover deck material behind the seams. I used PB and...

Jun 23, 2026
alldodge reacted to Bt Doctur's post in the thread MerCruiser shift cable install aid ideas. with Like.

custom made , I make a lot of neat little things on my lathe, ,

Jun 23, 2026
alldodge replied to the thread 2003 Crownline oil reservoir fitting.

The motor has to come out to replace. Ever since Merc went to the cheap plastic fitting there have been several that have broken. Part...

Jun 23, 2026
alldodge replied to the thread Help with Cool Fuel system removal 2005 312FV.

Welcome You are correct it how the complete module needs to come out. It can also be removed in pieces by leaving the bracket in place...

Jun 23, 2026
alldodge replied to the thread Knocking sound from my Alpha One Gen 2.

I think it's in the drive, something has loosened inside and/or chip/broken gear tooth. What does the gear lube look like?

Jun 23, 2026
alldodge reacted to Bt Doctur's post in the thread MerCruiser shift cable install aid ideas. with Like.

Heres a neat little tool to aid in installing a mercruiser shift cable thru the bellow.

Jun 23, 2026

Show older items

Home
Members

Top