I acquired a 1994 Boston Whaler 14 rage with a 90hp jet drive. I noticed that it was leaking oil under the boat. It seems like it is leaking from the jet unit. I am looking for the diagram for the jet unit. can anyone help, thanks
Sorry I meant the muffler parts. in the picture I have put an arrow where the crack is. the crack is located on the other side so cannot see from the picture. The crack is small and only shoot water when engine running. There is a water pressure gauge on the boat and the pressure is fine so...
I have a Boston whaler rage 14 with Johnson 90 hp engine. I recently notice that the auto bilge pump will turn on after I start engine. Finally I check the engine while running it. I notice there is a small crack on the water box part of the engine. It is shooting water when the engine was...
i am having problem with my Boston whaler rage 14. I find it have to goes straight while using trolling motor. I think the reason is that it is a jet boat with have a flat bottom and the trolling the back side tents to swing. I have a deep v boat that I find much easiler to control. I just the...
Hi, quick question. I have a Boston whaler rage with 90hp engine. My question is that can I use a jet ski battery for starting the motor? Will the smaller battery handle it? The reason is that I use my boat for fishing use a lot of trolling motor. So I need the space for two deep cycle battery...
I have a Boston whaler rage 14 which I convert to a fishing boat. Love it so far. The only problem I have with it is while fishing along the shore line with trolling motor. The back of the boat tent to swing left and right making it very hard to control..... I wonder if I add a homemake rudder...
I have been search online for this project for a while now. a lot of people take about it and only one I can find did it. but it doesn't have a lot of info on what components are needed. so I decided to do it my self and do it as cheap as possible. Here are the pictures.
Original control...
I am looking to get some underwater LED for the drain plug. The problem is that I have a boston whaler Rage 14 which has the drain plug underneath the boat facing down. I look at the LED on ebay if I install it , part of it is going to stick out of the drain. I don't know if that is ok or would...
I have Boston whaler rage 14 jet boat. It has a OMC turbojet 90hp as an inboard. I just finish rebuilding it and it has been running smooth, but I notice a "problem". The whole engine get very hot after a while, it was too hot to touch, can't place my hand on the fly wheel for more then 2...
I acquired a OMC 90HP v4 Flatback. the problem is that it doesn't come with a VRO pump. So I convert it to a premixed and install a fuel pump. it is working fine. However there is one hose that I don't know where to connect it. on the label it said it is a drain hose. please look at the picture...
I just acquire a 1994 Boston whaler rage 14 with 90hp. Engine was taken apart when I got it. I put it back an it run ok. It just take a while for the boat to plane. My question is what should be the top speed of this boat and the WOT rpm? thanks
I am rebuilding a turbojet 90hp v4. The engine was apart when I got it. I manage to put everything back and found all the hose connection except for one. The one on the exhuast cover. I have no idea where it connect to. Can anyone with is motor please help me out? Thanks
P/s I will try to...
Just finish rebuilding a 1994 omc 90hp v4 engine. When I test the compression is read 102, 102, 102, 125. The 4th piston have a high compression read. Is this namal?
I acquired a 1994 Boston whaler 14 rage with 90hp jet drive. The motor was taken apart and I have put it back together (ps I rebuilt some 2 cycle jet ski engine before) After putting the engine back, I discover that the Hoses for the check valve was missing, I need the diagram for the hoses. can...
