Recent content by Cassidy0013

Ok so I’m getting 13 volts when check with a meter at the battery and when I test the yellow/red striped wire that feeds the power pack I am only getting 9.45 volts would that cause me to not have spark at all?

Ok thank you for the feed back I will for sure do that. Can anyone give me an idea of where to start at until I can get the manual?

Are you asking for the model number for the motor? Sorry for the dumb replay

Please forgive me I’m not real sure what or where that is or how to test it. I know basic stuff.

Ok so I need some help I have no spark to all 6 spark plugs. I’ve changed the kill switch Removed the black and yellow wire and no luck. Ive unplugged shift switch and still no spark. I’m looking for a general detection to where I should look next. I was thinking the stator? Should I look...

Ok so if the relays are not clicking then there bad right is it common for both to go out? And like I said it’s been sitting for six years

And the above picture is the only fuse I am finding on the motor I’m not finding one by the relay box.

So I have power at the relays now. And I check the tilt and trim motor and they work. But like I said earlier in the post that I am in the middle of changing out my starter and I don’t have the - wires that ground to the block attached would that keep the tilt and trim switch from working?

And yes it’s a 20 fuse sorry.

It’s a 90 v6

The only fuse is the 40amp. Everything looks good as far as connections go I’ve even pulled back the housing on the wiring to where all three Buttons come together being the one at the throttle the one on the motor and the one by trolling motor and no power I have a red green and blue wire and...

Hi I am have some issue on figuring out why I have no power to my tilt and trim relays. I have a 1996 Johnson 150.