I put new shift cable on did all the adjustment like the manual but it shifted into reverse but not forward. I started moving the cable up the slot got to the point where it barely got into reverse but still doesn't go into forward.
One my outdrive it goes down/in but only the middle button will raise it. Up button doesn't even click when pushed. I have a 1970 stamas/ Merc outdrive. Got the three button on the dash
I bought new batteries old ones where 2\11 figured it was time. There was no short. Thanks for the info. Now I have shifting adjustment problems. I have mercruiser in/out board I had it going in forward but died in reverse now reverse f fie but won't go into forward. I screwed around with the...
Hey guys OK I got the boat in the water its first since I got it . First the steering stopped wheel turns piston goes in and out buy notice a big brass but off the piston put it on and wheel didn't turn at all. Had to disconnect and steer by hand with friend telling me what direction to go. It...
I just changed the shifter cable i set it up like the old one. Well couldn't get into reverse and triggered shut off I read the manual but still not sure if I have the cable adjusted on the transom plate. I have a mercruiser outboard and 6 cyclinder inboard
I have the Stamas 21' in/outboard. Yesterday I couldn't get out of forward. The shift cable outer tube was shot so put on a new cable the same one and same way. I can get in and out of forward but when going into reverse I hear it grinding and the engine dies. Could the cable not be...
Just bought a 1988 javelin 18'. I ripped up the floor and taking out the foam I noticed top 2" of the ribs rotted. Can I sister up one side with pvc 1x6 and then glass over the old rib? Charkate