chartersj's latest activity

Well I can’t say for sure as I didn’t keep track when I pulled the old plugs. I’m thinking of swapping the steam cleaned plugs with the...

No water in the oil. And Ive never got any water out of the cylinders. Just a little laying in the bottom of the manifolds. I’m...

Unfortunately I didn’t keep track when I took the original ones out. I put new ac delco ones in. So am I looking at something deeper...

Another picture of the worst looking ones

It’s efi but throttle body injection. So it has two fuel injectors not 8. On a couple of the original plugs I half wondered if I was...

Yeah they are surprisingly heavy. I got the exhaust from my buddy, but not sure they are usable. The mating surfaces are worse than...

My engine has the cold manifolds. Only one hose goes to the bottom of each manifold, and 160 thermostat. It is getting cool here now...

Just checked compression, all were between 172 and 190 psi. I ordered an Amazon borescope this morning, And I’m buying a good set of...

Ok thanks. I assume that could get water in both sides? What about head gaskets? But what are the odds both are bad,,,,

Boat was only fresh water used it’s whole life until I bought it 4 years ago. It never sits in the water and I flush it after every use

Not really, in my picture,,,,the middle two were each side front cylinders, working out each way to the rears on each side.

Figured I’d show what the brand new plugs looked like after the 15 minute run I have been meaning to get myself a cheap borescope

If you just have it idling on the water hose on a cool day, the exhaust might not even get up to 100*F, so a small amount of water can...

Yeah that would be the thing to do. I will definitely look into that