Recent content by dannyman3

  1. D

    what props inter change with 150hp

    i have 1998 dt150s suzuki what other model props inter change anyone have a site can look this up or know
  2. D

    what props inter change with 150hp

    i have a guy trying sell me a prop off a 150hp johnson i have a 1998 dt150s suzuki it has 15 spline and 4/1/4 hub will this work is there a site that shows what props inter change thanks to all for help
  3. D

    any good motor hull set up guys on here

    i have a bass boat with 150 what ive had trubble with in da past was china walking at hi speeds ive tried everthing my pad has a v it isnt flat i was told that was the prob so im just gonna keep it under the speed where it starts to do that what i need help with on the motor ive moved the motor...
  4. D

    dt150s want to max power

    i have a dt150s suzuki that is the motor with 12 sparkplugs it runs good i would like to see if there was and bolt ons i can put on for more power thanks
  5. D

    when is it trimed to hi

    i have a 1998 stealth 6in jack plate i do not have a trim gage i just need to know when ive went to far if i trim to far will that make it chinawalk or does that have any thing to do with it thanks to all the greats on here
  6. D

    what hyrdofoil for a 150 hp

    i have a 18ft bassboat with 150hp that lifts the bow to hi do i need a hydorfoil if so what kind i was told did need and didnt for the 150hp im lost
  7. D

    need to get the right info

    ive been told to many diffrent things on this is there a a thread or post on how to mount the motor on the boat i have a jackplate its 6 inch set back where is the point i set the cavitation plate i was told to level the boat then level the motor with the level on that plate then level it to the...
  8. D

    cavitation plate

    ok my hull has the step up under the back i dont know what that is called but im trying to get the motor set up what i was told was to get the boat level level the motor and take the level from the v on the upper part of the hull and level the cavitation plate and that is where it needs to be...
  9. D

    gonna wreck chine walking bad

    i have a 19ft stelth bass boat with a efi 150 hp 4 blade 23 pitch prob this motor has a hole in the foot for the speedometer and i haft to adjust this so hi it dont work i have a jackplate and a whaletail when i set it to where the speedometer works it will get up to 55 mph and start china...
  10. D

    cough at idel

    i have a efi 150. runs good, but when trolling, it will cough, about ever 8 to 10 min, the rev light and temp light comes on, and the buzzer beeps one time, like it does when first turn the key on, it comes out the hole good, top end good, idels good, outher than the cough. checked compression...
  11. D

    miss and buzzer goes off

    i have a 1998 150 efi motor it will miss at idel trolling about ever 5to 10 min it will miss one time the buzzer makes one beep the temp and rev light will come on it seams to run good other than the one miss ever 5 min or so it is a suzuki motor i know this wrong site but ive had great help...
  12. D

    150 efi fuel trubble

    this has a 30 gal tank the vent is clear have new hoses and buld the bulb sucks flat at idel as well as wide open can take the fuel cap off and it still does it where should look for the trubble this is my first efi motor
  13. D

    1998 dt150s fuel prob

    i have a 1998 dt150s its efi and put new hosees and bulb on it the tank is a 30gal and the vent it clear the bulb goes flat at idel as well as wide open can take the cap off the tank it still does it where should i look for the trubble
  14. D

    dt 150 s suzuki

    runs great ideals at 300 rmps will beep ever 300 ft do i just need to idel it up a little od do i have a prob, has sit over a year runs good just that low idel beep goes off
  15. D

    1998 150 to low idel

    i took boat out today it has sit for a year it run good the only thing when would let it idel in gear go about 300 ft and the buzzer would beep one time and doit again 300 more ft i gave it just a little gas up to 800 rpm it never come on its was ideling at 300 to 400 rpm in gear not sure why it...
See more
Top