I need the bolt/bushing that connects the forward/reverse linkage cable to the shifter inside the control box. Sometimes it grinds when in reverse and sometimes it doesn't. I pulled the control box apart and it looks like only half of the bolt/bushing is there. I can simply lift it out with...
When the 1992 Merc 115 was on the boat I could adjust the tilt from three places on the boat. Now that I have a 1995 150 Intruder (along with another control box) installed I can only control it from the throttle and the engine itself. I want to wire up the tilt control that's located in the...
I've replaced the coil, not the problem. Based on what I've read it's the switch box, stator, or trigger. I don't have a clue as to how to test to see what the problem is. Where do I start?
Just put the boat on the water for the first time and I can only hit 15 mph at 2800 rpm. It just won't run any faster. What's wierd is if I steer HARD to the left rpms jump to around 3500 then about 10 seconds later it dies. After it dies I can restart it and do it all over again. It idles...
Just bought a 1992 procraft v-180c and I'm wondering what the difference is between the 1992 Procraft 180 combo and the Procraft V-180c (I'm guessing V means Viper). What is the significance of the "V"????????
