Recent content by Edan7

  1. E

    Piranha prop selection help

    Right now with this 19 pitch I'm maxing out at 6000 rpm +/- 100 depending on weight in the boat. Don't think I want to create more load with a higher pitch so I'm gonna stick with this for now at least. Thanks for the advice
  2. E

    Piranha prop selection help

    Thanks for the input. I think the larger than expected change came from changing from the aluminum to the Piranha prop. I just tried the 19 inch semi cleaver piranha prop this weekend and that brought my max rpm to around 5900 at 34 mph with a full fuel tank and two in the boat. It seamed to...
  3. E

    Piranha prop selection help

    Hi, I've been trying a few different blades for my boat and wanted input on where I should be heading from some of you with more experience in prop selection. My boat is a 15ft silverline aruba 15v. I have a 1986 evinrude 70hp on it that's running strong. The motor came of a larger boat and...
  4. E

    1986 Evinrude 70 HP E70ELCDC Shift Rod Length

    Hi there, I know there might be some similar threads out there already but looking for confirmation on some questions. So my somewhat novice self went ahead and took apart the lower unit to replace the water pump and all of the seals. Shortly after I learned that I should've marked the shift...
  5. E

    70 HP vs 90 HP Evinrude: Which to Buy?

    I see now, should be relocated to the top of the block, got it thanks.
  6. E

    70 HP vs 90 HP Evinrude: Which to Buy?

    Thanks, great advice! Is that the elbow and hose for the VRO pump you're mentioning? What should I be looking for there in terms of its location? Thanks
  7. E

    70 HP vs 90 HP Evinrude: Which to Buy?

    These are all good points and I appreciate everyone's input here. To be honest I was always leaning towards the 70 a little to begin with. Will go check that one out first and see what shape it's in up close. Thanks!
  8. E

    70 HP vs 90 HP Evinrude: Which to Buy?

    Should the 70 still do alright getting on plane while pulling a tube or kneeboard?
  9. E

    70 HP vs 90 HP Evinrude: Which to Buy?

    Makes sense. Okay, so assuming both are in a good running condition, is the 90 the way to go? If not in good condition then I'll reassess but right now I have to go under this assumption until I go check it out.
  10. E

    70 HP vs 90 HP Evinrude: Which to Buy?

    With the big "if" are there any particular flaws in these engines to look for beyond the standard things to check out when buying a used outboard?
  11. E

    70 HP vs 90 HP Evinrude: Which to Buy?

    They were both only used in fresh water. And the hull is rated for a max 85 hp, 750 lbs person capacity, 1245 lbs maximum weight. I know the 90 would be 5 hp over that but these are the only motors I've been able to find locally that seem to be in decent shape and within my budget. Also they...
  12. E

    70 HP vs 90 HP Evinrude: Which to Buy?

    If it does turn out to be an 82 model would the consensus still be to go for the 90 over the 70? Are there any issues with that older model besides likely not having VRO? Would that put it before the shaft/crank hp ratings and make it closer in power to the 70 or is that shaft/crank rating a...
  13. E

    70 HP vs 90 HP Evinrude: Which to Buy?

    These are the only pictures I have on hand of both, still mounted on other boats at the moment. No warranty, they're both private sales. I was intending to test compression at pick up and replace the water pump impeller once I get it home. I don't have model numbers at the moment so unsure if...
  14. E

    70 HP vs 90 HP Evinrude: Which to Buy?

    And both units available have power tilt and trim. I've also got a 12-gallon fuel tank, in case fuel range might seem like an issue with one of these, but I will mainly be going to smaller local lakes, with no massive boat journeys planned.
  15. E

    70 HP vs 90 HP Evinrude: Which to Buy?

    Hi all, still new to this so hope I'm asking in the right place. I've got the opportunity to purchase either a 1985 90 hp or 1987 70 hp Evinrude to repower my boat that I've just restored. The boat is a 15 ft fiberglass, early 70's Silverline Aruba 15v. I would like your input on which one I...
See more
Top