Hi, have got an 07 Hurricane with a Faria tach and a 115 4 stroke Yamaha. It's got 83 hours on it total and about 10 hours ago the tach started reading about 1500 rpm high. Boat runs exactly the same as far as speeds, engine noise and smoothness. I even swapped props just to make sure it wasn't...
Have an 07 Hurricane 196RE with a FS115 Yamaha. With the stock prop it ran 40mph with a max of 5800 rpm. At approx 20 hrs I got a minor ding in that prop and elected to go with a SS Stiletto. Same pitch and diameter (13.25X17). Unfortunately performance dropped to 38 mph at a max (WOT) rpm of...
I know it's cold where most of you but here is SW FL it's pushing 80. I've got a new boat with a black cover. Will be deadly in the summer. Has anyone ever used a fan under the cover to help cool it down, keep it dry and reduce mold??
Got a new 115 Yamaha. the pitot hole for the speedometer is quite small and ALWAYS gets clogged making the speedometer fairly worthless. Came across a product called speedoclear which connects in the tubing and pumps pressure out the pitot any time you push a button. Is anyone familiar with this...
Just got the above boat and it came with a decent cover but it is unfortunately BLACK. Living in SW FL the sun will probably melt the boat in the summer. Do they normally come in black or can I lay my hands on a white one somewhere?
Bought a new Hurricane Deck Boat. When I picked it up I discovered it had a black cover. As I live in SW FL, this is not optimal in the summer sun as it will probably be over 150 degrees underneath and cause condensation issues, mold and other problem with interior and panel. Is there a way to...
Replacing the stock prop on a F115 Yamaha outboard with a Stiletto. Suppossed to reuse the thrust washer but am not 100% sure if the coppery looking raised section in the attached photo is actually the thrust washer. (couldn't get it off). Can anyone verify if it is indeed the thrust washer..thx...
