I have searched many sites Iboats, overtons etc. for a ski locker lid. that fits into the deck. I just finished replacing the deck and need to find a suitable hatch, lid what ever it is called. the old one had wood slats that were trashed and the metal ring was split in two areas. If anyone can...
I was just wondering about a tool called multimaster does anyone own one and is it worth the price. It looks amazing and with the access to tight areas. I also know that Home Depot carries a Ryobi that has a similar style. Thank you for any information offered.
After removing the plywood deck, I found wood needing replaced. How do I go about ripping the stringers length wise as I only need to replace the top 3 inches of woodl I did drill all stringers at various depths to find dry or wet wood shavings. I only need to replace wood around the area...
I lifted plywood on one side of the boat to find water logged foam..( of course). My questions are. I am using a drywall saw to cut through sections of the foam about 2 inches wide and using a small pry bar to break the foam little section at a time. Is there a faster or better way to remove...
Hello all, new to the iboat world. I have a 1983 glassport which I decided to replace the deck due to soft spots. Only to find severe cancer when lifting the carpet. The gas tank enclosure is wet and the wood is rotten all the way through. My question is where do I start next. How do I take the...
Need to remove shift lever so I can get panel off. Merc 470, shifter has HI-LEX on the plastic cap. On the handle there is a tilt trim toggle, but there also seems to be a tilt toggle on the panel along side the handle. Can I just cut the wires and splice later to remove? Thanks for your help
Hello all. I am new to the boat restoration hobby, I found great info on removing the interior panels and hardware in these forum post. However I removed a cover on the shift handle removed the screw and the handle and plastic plate where loose. but as for the wires do I just cut them behind...
